Vehicle Specific

Information Center

  Home > Supra - MKIII > Assemblies >

89-90 - FOG Light Adapter Harness
89-90 - FOG Light Adapter Harness

Alternative Views:

Our Price: $40.00

Product Code: YC-SUPHAR-89-90FOG


The old “cut and butt” re-wire is a thing of the past! This FOG Light Adapter will let you turn your fog lights on without your headlights being on. The adapter harness will also turn the fog lights off when the key is turned off, so you don’t have to worry about killing your battery! The factory fog light switch will not be altered in any way and it will still be used to turn the fog lights on. The adapter simply plugs in between two points and you can have control of your fogs!

This adapter is for the 1989 through 1992 cars only!

Installation is simple and quick. You will need the following tools:

1. Philips screw driver

2. 10mm Deep Socket and Ratchet

The following is a quick overview of the install process

1. Remove driver’s side door sill (4 screws)

2. Remove the “dead pedal” (2 screws)

3. Remove the “switch panel” (1 screw, 1 to 4 connectors)

4. Remove the “kick panel” (6 screws total, 2 screws for hood popper, 1 screw from step 3)

5. Remove the “side panel” (1 M6 nut & 3 clips)

6. Find connector “E1” and un-plug it

7. Find the Fog Lights Relay and un-plug it

8. Install the FOG Adapter between the “E1” connector and the Fog Lights Relay

9. Connect the “switch panel” and test the fog lights

10. After the test re-install all of the interior components in reverse of removal

** Intended for off-road use. For any on-road use, you must check with your local governing laws to see if your fog lights can be independently controlled from your headlights; YotaConnectors will be not be held responsible for any tickets, fines, lawsuits, damages, etc. for breaking your local laws. **

Install Video

Share your knowledge of this product. Be the first to write a review »